These results are ranked by popularity.
| Error | |
|---|---|
| P4A ... P4X | Description: P4A P4B P4C P4D PFE P4F P4G P4H P4J P4K P4L P4S P4T P4V P4W P4X Process Drive stalled on power-up following an abnormal shutdown. Process Drive stalled on power-up following a normal shutdown. Process Drive stalled during mechanical recovery |
| 34,01X | Description: Ink Level Sense Faults There are two known ways an Ink level sense over-range fault can occur. One fault condition results from an internal short in the sensor or Printhead. In these cases, replacement of the Printhead is required. A more co |
| 7,01X.4x | Description: Process Faults A Process Drive or Printhead error has occurred. The following troubleshooting procedures apply to these errors: 7,010.43 Printhead is stuck or is not tilting properly. See IQ35. 7,011.44 Soft fault. System continues to operat |
| 11,100.60 | Description: Electronics Module Temperature Fault The root problem for this error is temperature sensitivity with the power supply’s opto-isolator chips. The following troubleshooting procedure applies to this error: 11,100.60 The system reports an overh |
| 37,0XX.4x | Description: PEST Power Supply Faults An Power Supply error has occurred. The following troubleshooting procedure applies to these errors: 37,041.41 The Power Supply failed to reset. 37,043.43 The Power Supply 2.5 V source over limit. 37,044.44 The Power |
The most common error codes.
| Error | |
|---|---|
| P4A ... P4X | Description: P4A P4B P4C P4D PFE P4F P4G P4H P4J P4K P4L P4S P4T P4V P4W P4X Process Drive stalled on power-up following an abnormal shutdown. Process Drive stalled on power-up following a normal shutdown. Process Drive stalled during mechanical recovery |
| 34,01X | Description: Ink Level Sense Faults There are two known ways an Ink level sense over-range fault can occur. One fault condition results from an internal short in the sensor or Printhead. In these cases, replacement of the Printhead is required. A more co |
| 7,01X.4x | Description: Process Faults A Process Drive or Printhead error has occurred. The following troubleshooting procedures apply to these errors: 7,010.43 Printhead is stuck or is not tilting properly. See IQ35. 7,011.44 Soft fault. System continues to operat |
| 11,100.60 | Description: Electronics Module Temperature Fault The root problem for this error is temperature sensitivity with the power supply’s opto-isolator chips. The following troubleshooting procedure applies to this error: 11,100.60 The system reports an overh |
| 37,0XX.4x | Description: PEST Power Supply Faults An Power Supply error has occurred. The following troubleshooting procedure applies to these errors: 37,041.41 The Power Supply failed to reset. 37,043.43 The Power Supply 2.5 V source over limit. 37,044.44 The Power |
| P4A ... P4X | Description: P4A P4B P4C P4D PFE P4F P4G P4H P4J P4K P4L P4S P4T P4V P4W P4X Process Drive stalled on power-up following an abnormal shutdown. Process Drive stalled on power-up following a normal shutdown. Process Drive stalled during mechanical recovery |
| 34,01X | Description: Ink Level Sense Faults There are two known ways an Ink level sense over-range fault can occur. One fault condition results from an internal short in the sensor or Printhead. In these cases, replacement of the Printhead is required. A more co |
| 7,01X.4x | Description: Process Faults A Process Drive or Printhead error has occurred. The following troubleshooting procedures apply to these errors: 7,010.43 Printhead is stuck or is not tilting properly. See IQ35. 7,011.44 Soft fault. System continues to operat |
| 11,100.60 | Description: Electronics Module Temperature Fault The root problem for this error is temperature sensitivity with the power supply’s opto-isolator chips. The following troubleshooting procedure applies to this error: 11,100.60 The system reports an overh |
| 37,0XX.4x | Description: PEST Power Supply Faults An Power Supply error has occurred. The following troubleshooting procedure applies to these errors: 37,041.41 The Power Supply failed to reset. 37,043.43 The Power Supply 2.5 V source over limit. 37,044.44 The Power |
