Xerox Phaser 6350 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 6350 Top Searches

These results are ranked by popularity.

Error
165Description: Out of Paper; Load Tray 1 (MPT) with [size] [type] The Tray 1 (MPT) No Paper Sensor indicates Tray 1 (MPT) is empty.
212Description: Install or Reseat Imaging Unit The Imaging Unit CRUM fails to detect the Imaging Unit.
223Description: Metered Toner Is not Enabled A metered toner cartridge is installed while metered toner is not enabled.
07 ... 11Description: Laser Failure An error was detected in the Laser Unit. Code 07: Laser power has failed Code 08: Start of Scan (SOS) failure 1 Code 09: Start of Scan (SOS) failure 2 Code 10: Warm up failure Code 11: This is the generic laser fault used by th
77Description: Image Density Failure The engine detected a low-density image condition.

Xerox Phaser 6350 Common Errors

The most common error codes.

Error
165Description: Out of Paper; Load Tray 1 (MPT) with [size] [type] The Tray 1 (MPT) No Paper Sensor indicates Tray 1 (MPT) is empty.
212Description: Install or Reseat Imaging Unit The Imaging Unit CRUM fails to detect the Imaging Unit.
223Description: Metered Toner Is not Enabled A metered toner cartridge is installed while metered toner is not enabled.
07 ... 11Description: Laser Failure An error was detected in the Laser Unit. Code 07: Laser power has failed Code 08: Start of Scan (SOS) failure 1 Code 09: Start of Scan (SOS) failure 2 Code 10: Warm up failure Code 11: This is the generic laser fault used by th
77Description: Image Density Failure The engine detected a low-density image condition.
165Description: Out of Paper; Load Tray 1 (MPT) with [size] [type] The Tray 1 (MPT) No Paper Sensor indicates Tray 1 (MPT) is empty.
212Description: Install or Reseat Imaging Unit The Imaging Unit CRUM fails to detect the Imaging Unit.
223Description: Metered Toner Is not Enabled A metered toner cartridge is installed while metered toner is not enabled.
07 ... 11Description: Laser Failure An error was detected in the Laser Unit. Code 07: Laser power has failed Code 08: Start of Scan (SOS) failure 1 Code 09: Start of Scan (SOS) failure 2 Code 10: Warm up failure Code 11: This is the generic laser fault used by th
77Description: Image Density Failure The engine detected a low-density image condition.