Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 6125 Top Searches

These results are ranked by popularity.

Error
091-916Description: Replace Imaging Unit/PHD CRUM Error
-02Description: Waste Full, Yellow/Magenta/Cyan/Black Cartridge
010-351Description: Replace Fuser / Fuser Life The Fuser has reached end of life.
116-326Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (NVRAM2 W/R Check failure)
024-340Description: MCU Firmware Error The MCU Board detected a firmware error.

Xerox Phaser 6125 Common Errors

The most common error codes.

Error
091-916Description: Replace Imaging Unit/PHD CRUM Error
-02Description: Waste Full, Yellow/Magenta/Cyan/Black Cartridge
010-351Description: Replace Fuser / Fuser Life The Fuser has reached end of life.
116-326Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (NVRAM2 W/R Check failure)
024-340Description: MCU Firmware Error The MCU Board detected a firmware error.
091-916Description: Replace Imaging Unit/PHD CRUM Error
-02Description: Waste Full, Yellow/Magenta/Cyan/Black Cartridge
010-351Description: Replace Fuser / Fuser Life The Fuser has reached end of life.
116-326Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (NVRAM2 W/R Check failure)
024-340Description: MCU Firmware Error The MCU Board detected a firmware error.