Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5955 Top Searches

These results are ranked by popularity.

Error
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
393-399-00Description: Incompatible Toner Cartridge RAP 393-399-00 The toner cartridge CRUM failed the authorization check. The authorization check is performed to ensure that the toner cartridge installed in the system is compatible with the current machine confi

Xerox WorkCentre 5955 Common Errors

The most common error codes.

Error
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
393-399-00Description: Incompatible Toner Cartridge RAP 393-399-00 The toner cartridge CRUM failed the authorization check. The authorization check is performed to ensure that the toner cartridge installed in the system is compatible with the current machine confi
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
393-399-00Description: Incompatible Toner Cartridge RAP 393-399-00 The toner cartridge CRUM failed the authorization check. The authorization check is performed to ensure that the toner cartridge installed in the system is compatible with the current machine confi