Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5945 Top Searches

These results are ranked by popularity.

Error
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
312-127-00-110Description: Sheet Late to Hole Punch RAP 312-127-00-110 The lead edge of the paper failed to actuate the punch sensor from the entry sensor.

Xerox WorkCentre 5945 Common Errors

The most common error codes.

Error
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
312-127-00-110Description: Sheet Late to Hole Punch RAP 312-127-00-110 The lead edge of the paper failed to actuate the punch sensor from the entry sensor.
310-399-00Description: Fuser CRUM Authorization Failure RAP 310-399-00 The fuser CRUM failed the authorization check. The authorization check is performed to ensure that the fuser installed in the system is compatible with the machine configuration: 50Hz or 60Hz.
370ADescription: Tray Out of Service RAP The IOT detected a fault in the tray and determines that the tray is out of service. The messages that follow will be displayed: • ‘Tray 1 out of service.’ • ‘Tray 2 out of service.’ • ‘Tray 3 out of service.’ • ‘Tray
381-199-00Description: Lead Edge Late to HCF Exit Sensor from Tray 4 RAP 381-199-00 The lead edge of the paper was late to the HCF exit sensor when feeding from tray 4.
312-396-00-110, 312-397-00-110, 312-398-00-110Description: Rear Tamper Move Failure RAP 312-396-00-110 The rear tamper failed to move from the home position in the required time. 312-397-00-110 The rear tamper failed to return to the home position in the required time. 312-398-00-110 The rear tamper
312F-150Description: LVF PWB and LVF BM PWB DIP Switch Settings RAP To show the correct settings for the DIP switches on the LVF PWB and LVF BM PWB.