Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5790 Top Searches

These results are ranked by popularity.

Error
03-365Description: IOT Bus Failure RAP 03-365 The communications driver has failed. NOTE: This fault code can occur when the driver fails because of system electrical noise.
11J-110Description: Mis-Registration in Stapled Sets and Non-Stapled Sets RAP Use this RAP to identify and correct the causes of mis-registration in stapled sets, resulting in staples missing some sheets in the set, or poorly registered non-stapled sets.
08-100BDescription: Wait Sensor Jam RAP (65-90 ppm)
11-300-110, 11-302-110, 11-303-110Description: Interlocks RAP 11-300-110 The docking interlock is open during run mode. 11-302-110 The top cover interlock is open during run mode. 11-303-110 The front door interlock is open during run mode.
11-110-110Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.

Xerox WorkCentre 5790 Common Errors

The most common error codes.

Error
03-365Description: IOT Bus Failure RAP 03-365 The communications driver has failed. NOTE: This fault code can occur when the driver fails because of system electrical noise.
11J-110Description: Mis-Registration in Stapled Sets and Non-Stapled Sets RAP Use this RAP to identify and correct the causes of mis-registration in stapled sets, resulting in staples missing some sheets in the set, or poorly registered non-stapled sets.
08-100BDescription: Wait Sensor Jam RAP (65-90 ppm)
11-300-110, 11-302-110, 11-303-110Description: Interlocks RAP 11-300-110 The docking interlock is open during run mode. 11-302-110 The top cover interlock is open during run mode. 11-303-110 The front door interlock is open during run mode.
11-110-110Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.
03-365Description: IOT Bus Failure RAP 03-365 The communications driver has failed. NOTE: This fault code can occur when the driver fails because of system electrical noise.
11J-110Description: Mis-Registration in Stapled Sets and Non-Stapled Sets RAP Use this RAP to identify and correct the causes of mis-registration in stapled sets, resulting in staples missing some sheets in the set, or poorly registered non-stapled sets.
08-100BDescription: Wait Sensor Jam RAP (65-90 ppm)
11-300-110, 11-302-110, 11-303-110Description: Interlocks RAP 11-300-110 The docking interlock is open during run mode. 11-302-110 The top cover interlock is open during run mode. 11-303-110 The front door interlock is open during run mode.
11-110-110Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.