Select an Error Code or Type an Error Code to begin searching
Error
Xerox WorkCentre 5775 Top Searches
These results are ranked by popularity.
Error
14-110A
Description: Scan Carriage Home Sensor RAP (W/O TAG 150)
11-450-171, 11-456-171 to 11-459-171
Description: HVF Ejector Module RAP 11-450-171 The ejector module motor has stalled 11-456-171 The ejector module did not return to the home position. 11-457-171 The ejector module did not move from the home position. 11-458-171 The ejector module did no
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
09-399
Description: Incompatible Xerographic Module RAP 09-399 The xerographic module CRUM failed the authorization check. The authorization check is performed to ensure that the xerographic module installed in the system is compatible with the current machine
11-065-171, 11-383-171
Description: HVF BM Backstop Failure RAP 11-065-171 The HVF BM staple unit 1 has failed to leave the home position. 11-383-171 The HVF BM staple unit 1 has failed to return to the home position.
Xerox WorkCentre 5775 Common Errors
The most common error codes.
Error
14-110A
Description: Scan Carriage Home Sensor RAP (W/O TAG 150)
11-450-171, 11-456-171 to 11-459-171
Description: HVF Ejector Module RAP 11-450-171 The ejector module motor has stalled 11-456-171 The ejector module did not return to the home position. 11-457-171 The ejector module did not move from the home position. 11-458-171 The ejector module did no
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
09-399
Description: Incompatible Xerographic Module RAP 09-399 The xerographic module CRUM failed the authorization check. The authorization check is performed to ensure that the xerographic module installed in the system is compatible with the current machine
11-065-171, 11-383-171
Description: HVF BM Backstop Failure RAP 11-065-171 The HVF BM staple unit 1 has failed to leave the home position. 11-383-171 The HVF BM staple unit 1 has failed to return to the home position.
14-110A
Description: Scan Carriage Home Sensor RAP (W/O TAG 150)
11-450-171, 11-456-171 to 11-459-171
Description: HVF Ejector Module RAP 11-450-171 The ejector module motor has stalled 11-456-171 The ejector module did not return to the home position. 11-457-171 The ejector module did not move from the home position. 11-458-171 The ejector module did no
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
09-399
Description: Incompatible Xerographic Module RAP 09-399 The xerographic module CRUM failed the authorization check. The authorization check is performed to ensure that the xerographic module installed in the system is compatible with the current machine
11-065-171, 11-383-171
Description: HVF BM Backstop Failure RAP 11-065-171 The HVF BM staple unit 1 has failed to leave the home position. 11-383-171 The HVF BM staple unit 1 has failed to return to the home position.