Select an Error Code or Type an Error Code to begin searching
Error
Xerox WorkCentre 5740 Top Searches
These results are ranked by popularity.
Error
05-300
Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-460-171 ... 11-462-171
Description: HVF Bin 1 Position RAP 11-460-171 Bin 1 motor has stalled. 11-461-171 Bin 1 did not actuate the bin 1 upper level sensor during stacking. 11-462-171 Bin 1 did not leave the bin 1 upper level sensor during stacking.
14D
Description: Exposure Lamp Failure RAP (W/O TAG 150), use this RAP when the exposure lamp does not light, and there is no automatic gain control signal. NOTE: For W/TAG 150 machines, go to the 14-703B to 14-706B, 712B, 714B, 718B Failure to Calibrate RAP
09
Description: Photoreceptor Fan RAP Use this RAP to check the photoreceptor fan. NOTE: A faulty photoreceptor fan can cause image quality problems.
11-110-110
Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.
Xerox WorkCentre 5740 Common Errors
The most common error codes.
Error
05-300
Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-460-171 ... 11-462-171
Description: HVF Bin 1 Position RAP 11-460-171 Bin 1 motor has stalled. 11-461-171 Bin 1 did not actuate the bin 1 upper level sensor during stacking. 11-462-171 Bin 1 did not leave the bin 1 upper level sensor during stacking.
14D
Description: Exposure Lamp Failure RAP (W/O TAG 150), use this RAP when the exposure lamp does not light, and there is no automatic gain control signal. NOTE: For W/TAG 150 machines, go to the 14-703B to 14-706B, 712B, 714B, 718B Failure to Calibrate RAP
09
Description: Photoreceptor Fan RAP Use this RAP to check the photoreceptor fan. NOTE: A faulty photoreceptor fan can cause image quality problems.
11-110-110
Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.
05-300
Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-460-171 ... 11-462-171
Description: HVF Bin 1 Position RAP 11-460-171 Bin 1 motor has stalled. 11-461-171 Bin 1 did not actuate the bin 1 upper level sensor during stacking. 11-462-171 Bin 1 did not leave the bin 1 upper level sensor during stacking.
14D
Description: Exposure Lamp Failure RAP (W/O TAG 150), use this RAP when the exposure lamp does not light, and there is no automatic gain control signal. NOTE: For W/TAG 150 machines, go to the 14-703B to 14-706B, 712B, 714B, 718B Failure to Calibrate RAP
09
Description: Photoreceptor Fan RAP Use this RAP to check the photoreceptor fan. NOTE: A faulty photoreceptor fan can cause image quality problems.
11-110-110
Description: Sheet Late to Hole Punch RAP 11-110-110 Sheet late at the punch sensor.