Xerox WorkCentre 5685 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5685 Top Searches

These results are ranked by popularity.

Error
05-300Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-334-170, 11-335-170, 11-336-170Description: Bin 1 Elevate Failure RAP 11-334-170 The bin 1 upper limit switch has been actuated. 11-335-170 The bin 1 lower limit switch has been actuated. 11-336-170 Bin 1 fails to move to the home position.
08-155A, 08-156ADescription: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
11-100-171, 11-101-171Description: HVF Entry Sensor RAP 11-100-171 The paper leading edge is late arriving at the entry sensor. 11-101-171 The paper trailing edge is late leaving the entry sensor.
06-020Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor

Xerox WorkCentre 5685 Common Errors

The most common error codes.

Error
05-300Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-334-170, 11-335-170, 11-336-170Description: Bin 1 Elevate Failure RAP 11-334-170 The bin 1 upper limit switch has been actuated. 11-335-170 The bin 1 lower limit switch has been actuated. 11-336-170 Bin 1 fails to move to the home position.
08-155A, 08-156ADescription: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
11-100-171, 11-101-171Description: HVF Entry Sensor RAP 11-100-171 The paper leading edge is late arriving at the entry sensor. 11-101-171 The paper trailing edge is late leaving the entry sensor.
06-020Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
05-300Description: DADH Open RAP 05-300 The DADH closed switch detects that the DADH is open during run.
11-334-170, 11-335-170, 11-336-170Description: Bin 1 Elevate Failure RAP 11-334-170 The bin 1 upper limit switch has been actuated. 11-335-170 The bin 1 lower limit switch has been actuated. 11-336-170 Bin 1 fails to move to the home position.
08-155A, 08-156ADescription: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
11-100-171, 11-101-171Description: HVF Entry Sensor RAP 11-100-171 The paper leading edge is late arriving at the entry sensor. 11-101-171 The paper trailing edge is late leaving the entry sensor.
06-020Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor