Select an Error Code or Type an Error Code to begin searching
Error
Xerox WorkCentre 5675 Top Searches
These results are ranked by popularity.
Error
08-155A, 08-156A
Description: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
03-363
Description: HCSS BM Communication Failure RAP 03-363 The loss of communications between the HCSS PWB and the BM PWB.
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
11-403-171, 11-413-171, 11-414-171
Description: HVF BM Staple Head 2 and Stapler Module RAP 11-403-171 The booklet maker staple head 2 motor has failed to move. 11-413-171 The booklet maker staple head 2 is not detected in the home position. 11-414-171 The booklet maker stapler module is
11-061-171, 11-416-171
Description: HVF BM Creasing RAP 11-061-171 The crease blade has failed to clear the crease blade home sensor. 11-416-171 The crease blade has failed to return to the home position.
Xerox WorkCentre 5675 Common Errors
The most common error codes.
Error
08-155A, 08-156A
Description: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
03-363
Description: HCSS BM Communication Failure RAP 03-363 The loss of communications between the HCSS PWB and the BM PWB.
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
11-403-171, 11-413-171, 11-414-171
Description: HVF BM Staple Head 2 and Stapler Module RAP 11-403-171 The booklet maker staple head 2 motor has failed to move. 11-413-171 The booklet maker staple head 2 is not detected in the home position. 11-414-171 The booklet maker stapler module is
11-061-171, 11-416-171
Description: HVF BM Creasing RAP 11-061-171 The crease blade has failed to clear the crease blade home sensor. 11-416-171 The crease blade has failed to return to the home position.
08-155A, 08-156A
Description: Bypass Tray Registration Jam RAP (32- 55 ppm) 08-155 The lead edge of the paper failed to actuate the registration sensor within the correct time after start of feed from the bypass tray. 08-156 The IOT detects that a sheet fed from the bypa
03-363
Description: HCSS BM Communication Failure RAP 03-363 The loss of communications between the HCSS PWB and the BM PWB.
06-020
Description: ROS Motor Failure RAP 06-020. This fault code has two failure modes. 1. The ROS motor ready signal was not received by the IOT PWB within the set time of the ROS being powered on. 2. The IOT PWB recognizes a change of state of the ROS motor
11-403-171, 11-413-171, 11-414-171
Description: HVF BM Staple Head 2 and Stapler Module RAP 11-403-171 The booklet maker staple head 2 motor has failed to move. 11-413-171 The booklet maker staple head 2 is not detected in the home position. 11-414-171 The booklet maker stapler module is
11-061-171, 11-416-171
Description: HVF BM Creasing RAP 11-061-171 The crease blade has failed to clear the crease blade home sensor. 11-416-171 The crease blade has failed to return to the home position.