Xerox WorkCentre 5655 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5655 Top Searches

These results are ranked by popularity.

Error
05-310Description: Document too Short RAP 05-310 The DADH detects a document that is shorter than 110mm.
11-130-110, 11-132-110Description: Paper Exiting to Bin 0 RAP 11-130-110 The leading edge of the sheet is late to the top exit sensor. 11-132-110 The trailing edge of the sheet is late from the top exit sensor.
11-043-170, 11-350-170Description: Hole Punch Cycle Failure RAP 11-043-170 The hole punch fails to complete a cycle of operation.
10-107, 10-108, 10-109, 10-110Description: Trail Edge Late from Fuser Exit Switch RAP 10-107 The trail edge of the paper failed to de-actuate the fuser exit switch within the correct time after the trail edge at the registration sensor, for a simplex non inverted sheet. 10-108 The tr
11-479-171Description: HVF PPI Paper Length Fault RAP 11-479-171 A shorter than expected sheet has been fed from the PPI, (Post Print Inserter).

Xerox WorkCentre 5655 Common Errors

The most common error codes.

Error
05-310Description: Document too Short RAP 05-310 The DADH detects a document that is shorter than 110mm.
11-130-110, 11-132-110Description: Paper Exiting to Bin 0 RAP 11-130-110 The leading edge of the sheet is late to the top exit sensor. 11-132-110 The trailing edge of the sheet is late from the top exit sensor.
11-043-170, 11-350-170Description: Hole Punch Cycle Failure RAP 11-043-170 The hole punch fails to complete a cycle of operation.
10-107, 10-108, 10-109, 10-110Description: Trail Edge Late from Fuser Exit Switch RAP 10-107 The trail edge of the paper failed to de-actuate the fuser exit switch within the correct time after the trail edge at the registration sensor, for a simplex non inverted sheet. 10-108 The tr
11-479-171Description: HVF PPI Paper Length Fault RAP 11-479-171 A shorter than expected sheet has been fed from the PPI, (Post Print Inserter).
05-310Description: Document too Short RAP 05-310 The DADH detects a document that is shorter than 110mm.
11-130-110, 11-132-110Description: Paper Exiting to Bin 0 RAP 11-130-110 The leading edge of the sheet is late to the top exit sensor. 11-132-110 The trailing edge of the sheet is late from the top exit sensor.
11-043-170, 11-350-170Description: Hole Punch Cycle Failure RAP 11-043-170 The hole punch fails to complete a cycle of operation.
10-107, 10-108, 10-109, 10-110Description: Trail Edge Late from Fuser Exit Switch RAP 10-107 The trail edge of the paper failed to de-actuate the fuser exit switch within the correct time after the trail edge at the registration sensor, for a simplex non inverted sheet. 10-108 The tr
11-479-171Description: HVF PPI Paper Length Fault RAP 11-479-171 A shorter than expected sheet has been fed from the PPI, (Post Print Inserter).