Xerox WorkCentre 5645 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5645 Top Searches

These results are ranked by popularity.

Error
01-305Description: Left Hand Door Open RAP 01-305 The left hand door has been opened during machine operation
11-050-110, 11-360-110Description: Staple Head Operation Failure RAP 11-050-110 The staple head fails to cycle. 11-360-110 The staple head is not at the home position. NOTE: The home position is with the jaws of the staple head fully open. NOTE: Staple head operation faults c
10-132, 10-133, 10-134Description: Lead Edge Late to Inverter Sensor RAP (65-87 ppm) 10-132 The lead edge of the paper failed to actuate the inverter sensor within the correct time after the fuser exit switch is made, for a simplex sheet. 10-133 The lead edge of the paper fai
11B-110Description: Bin 1 Overload RAP Use this RAP to resolve a fault on the bin 1 90% full sensor.
08-115A, 08-117ADescription: Tray 5 Misfeed RAP (32-55 ppm) 08-115 The lead edge of the paper was late to the wait point sensor. 08-117 The lead edge of the paper failed to reach the feed sensor within the correct time after paper feed.

Xerox WorkCentre 5645 Common Errors

The most common error codes.

Error
01-305Description: Left Hand Door Open RAP 01-305 The left hand door has been opened during machine operation
11-050-110, 11-360-110Description: Staple Head Operation Failure RAP 11-050-110 The staple head fails to cycle. 11-360-110 The staple head is not at the home position. NOTE: The home position is with the jaws of the staple head fully open. NOTE: Staple head operation faults c
10-132, 10-133, 10-134Description: Lead Edge Late to Inverter Sensor RAP (65-87 ppm) 10-132 The lead edge of the paper failed to actuate the inverter sensor within the correct time after the fuser exit switch is made, for a simplex sheet. 10-133 The lead edge of the paper fai
11B-110Description: Bin 1 Overload RAP Use this RAP to resolve a fault on the bin 1 90% full sensor.
08-115A, 08-117ADescription: Tray 5 Misfeed RAP (32-55 ppm) 08-115 The lead edge of the paper was late to the wait point sensor. 08-117 The lead edge of the paper failed to reach the feed sensor within the correct time after paper feed.
01-305Description: Left Hand Door Open RAP 01-305 The left hand door has been opened during machine operation
11-050-110, 11-360-110Description: Staple Head Operation Failure RAP 11-050-110 The staple head fails to cycle. 11-360-110 The staple head is not at the home position. NOTE: The home position is with the jaws of the staple head fully open. NOTE: Staple head operation faults c
10-132, 10-133, 10-134Description: Lead Edge Late to Inverter Sensor RAP (65-87 ppm) 10-132 The lead edge of the paper failed to actuate the inverter sensor within the correct time after the fuser exit switch is made, for a simplex sheet. 10-133 The lead edge of the paper fai
11B-110Description: Bin 1 Overload RAP Use this RAP to resolve a fault on the bin 1 90% full sensor.
08-115A, 08-117ADescription: Tray 5 Misfeed RAP (32-55 ppm) 08-115 The lead edge of the paper was late to the wait point sensor. 08-117 The lead edge of the paper failed to reach the feed sensor within the correct time after paper feed.