Select an Error Code or Type an Error Code to begin searching
Error
Xerox WorkCentre 5632 Top Searches
These results are ranked by popularity.
Error
06-350
Description: ROS Laser Not Under Control RAP 06-350. The IOT monitor has not received a reset command from the IOT ROS controller for more than 5 seconds during print.
11-157-171, 11-161-171
Description: HVF Buffer Position Sensor RAP 11-157-171 The paper leading edge is late arriving at the buffer position sensor. 11-161-171 The paper trailing edge is late leaving the buffer position sensor.
03-320 ... 03-324
Description: Image Processing PWB to DADH Error RAP 03-320 The image processing PWB to the DADH communications have failed. 03-322 The DADH has detected a read/write error. 03-323 The DADH has detected a software error. 03-324 The DADH has detected a boo
11-056-171, 11-057-171
Description: PPI Bottom Plate RAP 11-056-171 The PPI bottom plate has failed to return to the home position. 11-057-171 The PPI bottom plate has failed to lift.
11-005-130, 11-006-130, 11-310-130, 11-311-130
Description: Front Tamper Move Failure RAP 11-005-130 The front tamper fails to move to the front position. 11-006-130 The front tamper fails to move to the rear position. 11-310-130 The front tamper is not at the front home position. 11-311-130 The fron
Xerox WorkCentre 5632 Common Errors
The most common error codes.
Error
06-350
Description: ROS Laser Not Under Control RAP 06-350. The IOT monitor has not received a reset command from the IOT ROS controller for more than 5 seconds during print.
11-157-171, 11-161-171
Description: HVF Buffer Position Sensor RAP 11-157-171 The paper leading edge is late arriving at the buffer position sensor. 11-161-171 The paper trailing edge is late leaving the buffer position sensor.
03-320 ... 03-324
Description: Image Processing PWB to DADH Error RAP 03-320 The image processing PWB to the DADH communications have failed. 03-322 The DADH has detected a read/write error. 03-323 The DADH has detected a software error. 03-324 The DADH has detected a boo
11-056-171, 11-057-171
Description: PPI Bottom Plate RAP 11-056-171 The PPI bottom plate has failed to return to the home position. 11-057-171 The PPI bottom plate has failed to lift.
11-005-130, 11-006-130, 11-310-130, 11-311-130
Description: Front Tamper Move Failure RAP 11-005-130 The front tamper fails to move to the front position. 11-006-130 The front tamper fails to move to the rear position. 11-310-130 The front tamper is not at the front home position. 11-311-130 The fron
06-350
Description: ROS Laser Not Under Control RAP 06-350. The IOT monitor has not received a reset command from the IOT ROS controller for more than 5 seconds during print.
11-157-171, 11-161-171
Description: HVF Buffer Position Sensor RAP 11-157-171 The paper leading edge is late arriving at the buffer position sensor. 11-161-171 The paper trailing edge is late leaving the buffer position sensor.
03-320 ... 03-324
Description: Image Processing PWB to DADH Error RAP 03-320 The image processing PWB to the DADH communications have failed. 03-322 The DADH has detected a read/write error. 03-323 The DADH has detected a software error. 03-324 The DADH has detected a boo
11-056-171, 11-057-171
Description: PPI Bottom Plate RAP 11-056-171 The PPI bottom plate has failed to return to the home position. 11-057-171 The PPI bottom plate has failed to lift.
11-005-130, 11-006-130, 11-310-130, 11-311-130
Description: Front Tamper Move Failure RAP 11-005-130 The front tamper fails to move to the front position. 11-006-130 The front tamper fails to move to the rear position. 11-310-130 The front tamper is not at the front home position. 11-311-130 The fron