Xerox Phaser 5550 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 5550 Top Searches

These results are ranked by popularity.

Error
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
U5-1Description: Toner Motor Failure - U5-1 Motor Rotation The Toner Dispense Motor failed to rotate.
E1-1Description: Paper Size Jam - E1-1 Regi Area Jam Paper did not pass the Registration Sensor located behind Door A, within the specified time.
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
J8-1, J8-2Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board.

Xerox Phaser 5550 Common Errors

The most common error codes.

Error
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
U5-1Description: Toner Motor Failure - U5-1 Motor Rotation The Toner Dispense Motor failed to rotate.
E1-1Description: Paper Size Jam - E1-1 Regi Area Jam Paper did not pass the Registration Sensor located behind Door A, within the specified time.
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
J8-1, J8-2Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board.
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
U5-1Description: Toner Motor Failure - U5-1 Motor Rotation The Toner Dispense Motor failed to rotate.
E1-1Description: Paper Size Jam - E1-1 Regi Area Jam Paper did not pass the Registration Sensor located behind Door A, within the specified time.
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
J8-1, J8-2Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board.