These results are ranked by popularity.
Error | |
---|---|
E3-1, E3-2 | Description: Jam at A - Fuser Area Jam Paper did not actuate the Fuser Exit Sensor, located behind Door A, within the specified time. • Jam at A - E3-1 Fuser Area Jam • Jam at A - E3-2 Fuser Area Jam |
J8-1, J8-2 | Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board. |
H8-1, H8-2 | Description: Tray N Failure - H8-1, Tray 2-3 Size Sensor Broken Paper size detection has failed in Tray 2 or Tray 3. NOTE: In cases where a Tray 2 Missing error occurs with Tray 2 inserted, verify the condition of the switches by first removing Tray 3, t |
U5-9 | Description: Fan Failure - U5-9 Fan Failure. |
H3-7 | Description: Exit Unit Failure - H3-7 Exit Board Comm Failure Communications failure between the Engine Control Board and Exit PWB. |
The most common error codes.
Error | |
---|---|
E3-1, E3-2 | Description: Jam at A - Fuser Area Jam Paper did not actuate the Fuser Exit Sensor, located behind Door A, within the specified time. • Jam at A - E3-1 Fuser Area Jam • Jam at A - E3-2 Fuser Area Jam |
J8-1, J8-2 | Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board. |
H8-1, H8-2 | Description: Tray N Failure - H8-1, Tray 2-3 Size Sensor Broken Paper size detection has failed in Tray 2 or Tray 3. NOTE: In cases where a Tray 2 Missing error occurs with Tray 2 inserted, verify the condition of the switches by first removing Tray 3, t |
U5-9 | Description: Fan Failure - U5-9 Fan Failure. |
H3-7 | Description: Exit Unit Failure - H3-7 Exit Board Comm Failure Communications failure between the Engine Control Board and Exit PWB. |
E3-1, E3-2 | Description: Jam at A - Fuser Area Jam Paper did not actuate the Fuser Exit Sensor, located behind Door A, within the specified time. • Jam at A - E3-1 Fuser Area Jam • Jam at A - E3-2 Fuser Area Jam |
J8-1, J8-2 | Description: Toner Cartridge Failure - J8-n Toner Comm/Read/Write The Toner CRUM PWB failed to communicate with the Engine Control Board. |
H8-1, H8-2 | Description: Tray N Failure - H8-1, Tray 2-3 Size Sensor Broken Paper size detection has failed in Tray 2 or Tray 3. NOTE: In cases where a Tray 2 Missing error occurs with Tray 2 inserted, verify the condition of the switches by first removing Tray 3, t |
U5-9 | Description: Fan Failure - U5-9 Fan Failure. |
H3-7 | Description: Exit Unit Failure - H3-7 Exit Board Comm Failure Communications failure between the Engine Control Board and Exit PWB. |