Xerox Phaser 5400 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 5400 Top Searches

These results are ranked by popularity.

Error
H6-7Description: Tray 6 Control Board Failure - H6-7 HFC Comm Failure A communications error occurred between Tray 6 and the Engine Control Board.
U1-4Description: Drum Motor Failure - U1-4 Drum Motor Failure The Drum Cartridge drive motor failed.
H1-5Description: Tray 6 Failure - H1-5 Tray 6 Fail Detected lift failure or paper size detection inoperative.
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error

Xerox Phaser 5400 Common Errors

The most common error codes.

Error
H6-7Description: Tray 6 Control Board Failure - H6-7 HFC Comm Failure A communications error occurred between Tray 6 and the Engine Control Board.
U1-4Description: Drum Motor Failure - U1-4 Drum Motor Failure The Drum Cartridge drive motor failed.
H1-5Description: Tray 6 Failure - H1-5 Tray 6 Fail Detected lift failure or paper size detection inoperative.
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
H6-7Description: Tray 6 Control Board Failure - H6-7 HFC Comm Failure A communications error occurred between Tray 6 and the Engine Control Board.
H1-5Description: Tray 6 Failure - H1-5 Tray 6 Fail Detected lift failure or paper size detection inoperative.
U1-4Description: Drum Motor Failure - U1-4 Drum Motor Failure The Drum Cartridge drive motor failed.
H5-22, H5-24Description: Stacker Lower Tray Failure - H5-2n Rear Home Sensor For H-22, the Rear Tamper Home Sensor is not turned On within 800 ms following the Rear Tamper beginning to move to the Rear Tamper Home position. For H5-24, the Rear Tamper Home Sensor is
H7-3, H7-4Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error