Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5335 Top Searches

These results are ranked by popularity.

Error
012-966Description: Scratch Sheet Compile RAP Paper was detected that was either out of spec, in poor condition (wrinkled, curled) and was ejected to the compiler.
024-960Description: Tray 2 Size Mismatch RAP The paper size in Tray 2 and the paper size specified for printing are different.
005-199Description: Too Long Size Jam RAP It was detected that the document length in Slow Scan direction was out of the specifications. • Simplex and Duplex modes: 431.9mm or longer • Fax mode: 1501.0mm or longer
062-277Description: ESS-DADF Communication Fail RAP Communication cannot be established between the ESS PWB and the DADF PWB. NOTE: When turning the power OFF, turn OFF the power switch first and then the main power switch.
012-280Description: (Integrated Finisher) Eject Home Sensor OFF Fail RAP In the Eject Motor’s initializing operation and ejecting operation, the Eject Motor had rotated forward for a time corresponding to a specified number of pulses since the Eject Home Sensor

Xerox WorkCentre 5335 Common Errors

The most common error codes.

Error
012-966Description: Scratch Sheet Compile RAP Paper was detected that was either out of spec, in poor condition (wrinkled, curled) and was ejected to the compiler.
024-960Description: Tray 2 Size Mismatch RAP The paper size in Tray 2 and the paper size specified for printing are different.
005-199Description: Too Long Size Jam RAP It was detected that the document length in Slow Scan direction was out of the specifications. • Simplex and Duplex modes: 431.9mm or longer • Fax mode: 1501.0mm or longer
062-277Description: ESS-DADF Communication Fail RAP Communication cannot be established between the ESS PWB and the DADF PWB. NOTE: When turning the power OFF, turn OFF the power switch first and then the main power switch.
012-280Description: (Integrated Finisher) Eject Home Sensor OFF Fail RAP In the Eject Motor’s initializing operation and ejecting operation, the Eject Motor had rotated forward for a time corresponding to a specified number of pulses since the Eject Home Sensor
012-280Description: (Integrated Finisher) Eject Home Sensor OFF Fail RAP In the Eject Motor’s initializing operation and ejecting operation, the Eject Motor had rotated forward for a time corresponding to a specified number of pulses since the Eject Home Sensor
062-277Description: ESS-DADF Communication Fail RAP Communication cannot be established between the ESS PWB and the DADF PWB. NOTE: When turning the power OFF, turn OFF the power switch first and then the main power switch.
077-101Description: Registration Sensor Off Jam RAP The Registration Sensor does not turn OFF within the specified time after the Registration Clutch On.
091-600Description: Temperature Sensor Fail RAP Environment Temp Sensor failure.
012-966Description: Scratch Sheet Compile RAP Paper was detected that was either out of spec, in poor condition (wrinkled, curled) and was ejected to the compiler.