Xerox WorkCentre 5230 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 5230 Top Searches

These results are ranked by popularity.

Error
071-940Description: Tray 2 Lift Up RAP The Tray 2 Level Sensor does not turn on within the designated time.
024-917Description: Stacker Tray Staple Set Over Count RAP The number of stapled copies exceeded the capacity of the Stacker Tray.
012-263Description: (A-Finisher) Rear Tamper Home Sensor ON Fail During the moving of the Rear Tamper from when the Rear Tamper Home Sensor was Off to the home position, the Rear Tamper Home Sensor was not detected turning On within a specified time after the R
005-309Description: CVT L/H Interlock Open RAP CVT L/H Interlock Open while running.
024-985Description: MPT Feed Failure RAP The job was aborted during MPT feed.

Xerox WorkCentre 5230 Common Errors

The most common error codes.

Error
071-940Description: Tray 2 Lift Up RAP The Tray 2 Level Sensor does not turn on within the designated time.
024-917Description: Stacker Tray Staple Set Over Count RAP The number of stapled copies exceeded the capacity of the Stacker Tray.
012-263Description: (A-Finisher) Rear Tamper Home Sensor ON Fail During the moving of the Rear Tamper from when the Rear Tamper Home Sensor was Off to the home position, the Rear Tamper Home Sensor was not detected turning On within a specified time after the R
005-309Description: CVT L/H Interlock Open RAP CVT L/H Interlock Open while running.
024-985Description: MPT Feed Failure RAP The job was aborted during MPT feed.
071-940Description: Tray 2 Lift Up RAP The Tray 2 Level Sensor does not turn on within the designated time.
024-985Description: MPT Feed Failure RAP The job was aborted during MPT feed.
024-977Description: Stapler Feed Ready Failure RAP When starting Staple, Staple Ready Sensor Off was detected.
024-917Description: Stacker Tray Staple Set Over Count RAP The number of stapled copies exceeded the capacity of the Stacker Tray.
012-263Description: (A-Finisher) Rear Tamper Home Sensor ON Fail During the moving of the Rear Tamper from when the Rear Tamper Home Sensor was Off to the home position, the Rear Tamper Home Sensor was not detected turning On within a specified time after the R