Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C2-2 | Description: Tray1 F/O#1 SNR on JAM from STM feed. Timeout between STM Feed Out Sensor ON and Tray 1 Feed Out Sensor ON. |
J7-3 | Description: Drum CRUM ID error. • The AIOC PWB has detected that the Drum CRUM ID is incorrect. |
U1-1 | Description: Main Motor Rotation Error. 500 ms after the IOT Motor starts, the IOT Motor Lock signal is Low. |
E0-1 | Description: CPM Image Lost. During a copy job in CMP Priority Mode, it is detected that the paper containing an image cannot be output after the image is deleted. |
E8-1 | Description: Nup NG Out Of Range. The magnification is not within the range of 50 to 200% during Nup. |
The most common error codes.
Error | |
---|---|
C2-2 | Description: Tray1 F/O#1 SNR on JAM from STM feed. Timeout between STM Feed Out Sensor ON and Tray 1 Feed Out Sensor ON. |
J7-3 | Description: Drum CRUM ID error. • The AIOC PWB has detected that the Drum CRUM ID is incorrect. |
U1-1 | Description: Main Motor Rotation Error. 500 ms after the IOT Motor starts, the IOT Motor Lock signal is Low. |
E0-1 | Description: CPM Image Lost. During a copy job in CMP Priority Mode, it is detected that the paper containing an image cannot be output after the image is deleted. |
E8-1 | Description: Nup NG Out Of Range. The magnification is not within the range of 50 to 200% during Nup. |
C2-2 | Description: Tray1 F/O#1 SNR on JAM from STM feed. Timeout between STM Feed Out Sensor ON and Tray 1 Feed Out Sensor ON. |
J7-3 | Description: Drum CRUM ID error. • The AIOC PWB has detected that the Drum CRUM ID is incorrect. |
U1-1 | Description: Main Motor Rotation Error. 500 ms after the IOT Motor starts, the IOT Motor Lock signal is Low. |
E0-1 | Description: CPM Image Lost. During a copy job in CMP Priority Mode, it is detected that the paper containing an image cannot be output after the image is deleted. |
E8-1 | Description: Nup NG Out Of Range. The magnification is not within the range of 50 to 200% during Nup. |