Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 4260 Top Searches

These results are ranked by popularity.

Error
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
04-910Description: SMPS Fan Locked RAP 04-910 The machine has detected a fault with the SMPS fan.

Xerox WorkCentre 4260 Common Errors

The most common error codes.

Error
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
04-910Description: SMPS Fan Locked RAP 04-910 The machine has detected a fault with the SMPS fan.
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
09-300Description: Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages.