Xerox Phaser 3320 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 3320 Top Searches

These results are ranked by popularity.

Error
07-530Description: Occurs when the machine detects non-feeding from the Bypass Tray. Remove the jam from Bypass Tray. Cycle printer power.
10-100, 10-200Description: The Fuser did not reach a Ready temperature during operation. Plug the printer directly into the wall outlet.
01-100Description: The Front Cover or Rear Door is open. Close an latch the door.
17-200Description: Network cable is not connected
05-900Description: A jam occurred near the top of the Duplex Assembly. Open the Rear Door and remove the jammed paper. Remove the Duplex Unit and check for jammed paper.

Xerox Phaser 3320 Common Errors

The most common error codes.

Error
07-530Description: Occurs when the machine detects non-feeding from the Bypass Tray. Remove the jam from Bypass Tray. Cycle printer power.
10-100, 10-200Description: The Fuser did not reach a Ready temperature during operation. Plug the printer directly into the wall outlet.
01-100Description: The Front Cover or Rear Door is open. Close an latch the door.
17-200Description: Network cable is not connected
05-900Description: A jam occurred near the top of the Duplex Assembly. Open the Rear Door and remove the jammed paper. Remove the Duplex Unit and check for jammed paper.
07-530Description: Occurs when the machine detects non-feeding from the Bypass Tray. Remove the jam from Bypass Tray. Cycle printer power.
10-100, 10-200Description: The Fuser did not reach a Ready temperature during operation. Plug the printer directly into the wall outlet.
01-100Description: The Front Cover or Rear Door is open. Close an latch the door.
17-200Description: Network cable is not connected
05-900Description: A jam occurred near the top of the Duplex Assembly. Open the Rear Door and remove the jammed paper. Remove the Duplex Unit and check for jammed paper.