Xerox Phaser 3260 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 3260 Top Searches

These results are ranked by popularity.

Error
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
01-100Description: Front Cover Open Fault The front cover is open or the cover open switch is defective.
08-500Description: Paper Jam in Exit Area Fault The machine has detected a paper jam in the Exit Area.
10-200, 10-300Description: Fuser Under/ Over Temperature Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)

Xerox Phaser 3260 Common Errors

The most common error codes.

Error
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
01-100Description: Front Cover Open Fault The front cover is open or the cover open switch is defective.
08-500Description: Paper Jam in Exit Area Fault The machine has detected a paper jam in the Exit Area.
10-200, 10-300Description: Fuser Under/ Over Temperature Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
01-100Description: Front Cover Open Fault The front cover is open or the cover open switch is defective.
08-500Description: Paper Jam in Exit Area Fault The machine has detected a paper jam in the Exit Area.
10-200, 10-300Description: Fuser Under/ Over Temperature Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)