Xerox WorkCentre 3225 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 3225 Top Searches

These results are ranked by popularity.

Error
07-530Description: Paper Feed Fault - Manual Feed Slot The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
20-200Description: Group Not Available Fault User has selected a group location where only a single location number can be used. (I.e.: Adding locations for a multi-dial operation.)
03-410Description: Paper Mismatch at Tray 1 The size setting for the Paper Tray does not match the paper size loaded in the tray.
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor

Xerox WorkCentre 3225 Common Errors

The most common error codes.

Error
07-530Description: Paper Feed Fault - Manual Feed Slot The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
20-200Description: Group Not Available Fault User has selected a group location where only a single location number can be used. (I.e.: Adding locations for a multi-dial operation.)
03-410Description: Paper Mismatch at Tray 1 The size setting for the Paper Tray does not match the paper size loaded in the tray.
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor
07-530Description: Paper Feed Fault - Manual Feed Slot The lead edge was not detected by the Paper Feed Sensor.
10-100Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
20-200Description: Group Not Available Fault User has selected a group location where only a single location number can be used. (I.e.: Adding locations for a multi-dial operation.)
03-410Description: Paper Mismatch at Tray 1 The size setting for the Paper Tray does not match the paper size loaded in the tray.
08-100Description: Paper Feed Fault - Tray 1 The lead edge was not detected by the Paper Feed Sensor