Xerox Phaser 3040 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 3040 Top Searches

These results are ranked by popularity.

Error
077-104Description: Regi Jam The paper does not pass through the Regi Sensor on time.
093-926Description: K CRUM ID Error An unsupported Toner Cartridge is detected.
116-323Description: Checksum error (Fax) Checksum error for Fax parameter is detected.
010-397Description: Fusing Failure Fusing temperature anomaly detected
024-340Description: MCU Firmware Error

Xerox Phaser 3040 Common Errors

The most common error codes.

Error
077-104Description: Regi Jam The paper does not pass through the Regi Sensor on time.
093-926Description: K CRUM ID Error An unsupported Toner Cartridge is detected.
116-323Description: Checksum error (Fax) Checksum error for Fax parameter is detected.
010-397Description: Fusing Failure Fusing temperature anomaly detected
024-340Description: MCU Firmware Error
077-104Description: Regi Jam The paper does not pass through the Regi Sensor on time.
093-926Description: K CRUM ID Error An unsupported Toner Cartridge is detected.
116-323Description: Checksum error (Fax) Checksum error for Fax parameter is detected.
010-397Description: Fusing Failure Fusing temperature anomaly detected
024-340Description: MCU Firmware Error