Toshiba e-Studio 720 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 720 Top Searches

These results are ranked by popularity.

Error
E722Description: Original not reaching large original exit sensor (during scanning): An original which has passed the read sensor does not reach the large original exit sensor when this original is transported from the scanning section to the exit section.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally.
F104Description: HDD data error: Abnormality is detected in the data of the HDD.
E331Description: 4th drawer transport jam (paper not reaching intermediate transport sensor): Paper which has passed the 1st drawer transport sensor does not reach the intermediate transport sensor during the feeding at the 4th drawer.
C4A0Description: End of cleaning web

Toshiba e-Studio 720 Common Errors

The most common error codes.

Error
E722Description: Original not reaching large original exit sensor (during scanning): An original which has passed the read sensor does not reach the large original exit sensor when this original is transported from the scanning section to the exit section.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally.
F104Description: HDD data error: Abnormality is detected in the data of the HDD.
E331Description: 4th drawer transport jam (paper not reaching intermediate transport sensor): Paper which has passed the 1st drawer transport sensor does not reach the intermediate transport sensor during the feeding at the 4th drawer.
C4A0Description: End of cleaning web
E722Description: Original not reaching large original exit sensor (during scanning): An original which has passed the read sensor does not reach the large original exit sensor when this original is transported from the scanning section to the exit section.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally.
F104Description: HDD data error: Abnormality is detected in the data of the HDD.
E331Description: 4th drawer transport jam (paper not reaching intermediate transport sensor): Paper which has passed the 1st drawer transport sensor does not reach the intermediate transport sensor during the feeding at the 4th drawer.
C4A0Description: End of cleaning web