Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 603 Top Searches

These results are ranked by popularity.

Error
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
E061Description: Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer differs from size setting of the equipment.
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally. [e-STUDIO850]
E3D0Description: Tandem LCF transport jam (paper not reaching 1st drawer transport sensor): Paper which has passed the 2nd drawer transport sensor does not reach the 1st drawer transport sensor during the feeding at the Tandem LCF.
E761Description: Original remaining at original length detection sensor

Toshiba e-Studio 603 Common Errors

The most common error codes.

Error
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
E061Description: Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer differs from size setting of the equipment.
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally. [e-STUDIO850]
E3D0Description: Tandem LCF transport jam (paper not reaching 1st drawer transport sensor): Paper which has passed the 2nd drawer transport sensor does not reach the 1st drawer transport sensor during the feeding at the Tandem LCF.
E761Description: Original remaining at original length detection sensor
E3D0Description: Tandem LCF transport jam (paper not reaching 1st drawer transport sensor): Paper which has passed the 2nd drawer transport sensor does not reach the 1st drawer transport sensor during the feeding at the Tandem LCF.
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally. [e-STUDIO850]
E061Description: Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer differs from size setting of the equipment.
E761Description: Original remaining at original length detection sensor