Select an Error Code or Type an Error Code to begin searching
| Error |
|---|
| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| C4A0 | Description: End of cleaning web |
| CBA0 | Description: Stitch motor (front) abnormality: The stitch motor (front) does not run normally or the rotational cam does not move normally. |
| C360 | Description: Wire cleaner drive motor abnormality: The wire cleaner drive motor does not run normally or the charger wire cleaner does not move normally. |
| CA20 | Description: H-sync detection error: Laser beam cannot be detected at the SNS board. |
| C467 | Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status) |
The most common error codes.
| Error | |
|---|---|
| C4A0 | Description: End of cleaning web |
| CBA0 | Description: Stitch motor (front) abnormality: The stitch motor (front) does not run normally or the rotational cam does not move normally. |
| C360 | Description: Wire cleaner drive motor abnormality: The wire cleaner drive motor does not run normally or the charger wire cleaner does not move normally. |
| CA20 | Description: H-sync detection error: Laser beam cannot be detected at the SNS board. |
| C467 | Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status) |
| C4A0 | Description: End of cleaning web |
| CBA0 | Description: Stitch motor (front) abnormality: The stitch motor (front) does not run normally or the rotational cam does not move normally. |
| C360 | Description: Wire cleaner drive motor abnormality: The wire cleaner drive motor does not run normally or the charger wire cleaner does not move normally. |
| CA20 | Description: H-sync detection error: Laser beam cannot be detected at the SNS board. |
| C467 | Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status) |