Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 557 Top Searches

These results are ranked by popularity.

Error
CF80Description: Hopper motor lockup: The hopper motor does not run normally when the power is ON or the copying is started.
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally.
E0A0Description: Image transport ready time-out jam: Image data to be printed cannot be sent.
C4B0Description: Fuser unit counter abnormality

Toshiba e-Studio 557 Common Errors

The most common error codes.

Error
CF80Description: Hopper motor lockup: The hopper motor does not run normally when the power is ON or the copying is started.
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally.
E0A0Description: Image transport ready time-out jam: Image data to be printed cannot be sent.
C4B0Description: Fuser unit counter abnormality
CF80Description: Hopper motor lockup: The hopper motor does not run normally when the power is ON or the copying is started.
C467Description: Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
CAF0Description: Inter-page correction error of primary scanning: Inter-page primary scanning control does not end normally.
E0A0Description: Image transport ready time-out jam: Image data to be printed cannot be sent.
C4B0Description: Fuser unit counter abnormality