Toshiba e-Studio 556SE Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 556SE Top Searches

These results are ranked by popularity.

Error
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing.
CF10Description: Undefined error code processing: If the engine of the equipment judges that a code (command) other than the defined error codes is sent from the finisher, it regards this as a CF10 error.
E714Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally
F107Description: /BOX partition damage

Toshiba e-Studio 556SE Common Errors

The most common error codes.

Error
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing.
CF10Description: Undefined error code processing: If the engine of the equipment judges that a code (command) other than the defined error codes is sent from the finisher, it regards this as a CF10 error.
E714Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally
F107Description: /BOX partition damage
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing.
CF10Description: Undefined error code processing: If the engine of the equipment judges that a code (command) other than the defined error codes is sent from the finisher, it regards this as a CF10 error.
E714Description: Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray.
CB40Description: Alignment motor (rear) abnormality: The alignment motor (rear) does not run normally or the alignment plate does not move normally
F107Description: /BOX partition damage