Toshiba e-Studio 555 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 555 Top Searches

These results are ranked by popularity.

Error
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.
C474Description: Power and voltage lower limit abnormality
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]

Toshiba e-Studio 555 Common Errors

The most common error codes.

Error
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.
C474Description: Power and voltage lower limit abnormality
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.
C474Description: Power and voltage lower limit abnormality
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]