Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 5520c Top Searches

These results are ranked by popularity.

Error
CF90Description: Laser optical unit shutter abnormality.
E2B1Description: Stop jam at the registration sensor (2nd drawer)
E722Description: Jam not reaching the original exit sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
CBB0Description: Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating or rotary cam is not moving normally. [MJ-1103/1104]
C890Description: RADF read motor abnormality: An error signal has been detected when the motor is rotating.

Toshiba e-Studio 5520c Common Errors

The most common error codes.

Error
CF90Description: Laser optical unit shutter abnormality.
E2B1Description: Stop jam at the registration sensor (2nd drawer)
E722Description: Jam not reaching the original exit sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
CBB0Description: Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating or rotary cam is not moving normally. [MJ-1103/1104]
C890Description: RADF read motor abnormality: An error signal has been detected when the motor is rotating.
CF90Description: Laser optical unit shutter abnormality.
E2B1Description: Stop jam at the registration sensor (2nd drawer)
E722Description: Jam not reaching the original exit sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
C443Description: Heater lamp abnormality after abnormality judgment (not reaching to intermediate temperature)
CBB0Description: Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating or rotary cam is not moving normally. [MJ-1103/1104]