Toshiba e-Studio 5055CSE Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 5055CSE Top Searches

These results are ranked by popularity.

Error
ED14Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ-1107/1108]
CB83Description: Saddle Stitch Finisher - Main CPU program error [MJ-1108]
E722Description: Jam not reaching the original exit/reverse sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
E3E0Description: LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor.
C4E2Description: Fuser belt rotation detection sensor abnormality - The fuser belt does not rotate or incorrectly rotates.

Toshiba e-Studio 5055CSE Common Errors

The most common error codes.

Error
ED14Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ-1107/1108]
CB83Description: Saddle Stitch Finisher - Main CPU program error [MJ-1108]
E722Description: Jam not reaching the original exit/reverse sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
E3E0Description: LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor.
C4E2Description: Fuser belt rotation detection sensor abnormality - The fuser belt does not rotate or incorrectly rotates.
ED14Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ-1107/1108]
CB83Description: Saddle Stitch Finisher - Main CPU program error [MJ-1108]
E722Description: Jam not reaching the original exit/reverse sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section.
E3E0Description: LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor.
C4E2Description: Fuser belt rotation detection sensor abnormality - The fuser belt does not rotate or incorrectly rotates.