Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C260 | Description: Scanning system related service call Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON. |
CB50 | Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033] |
C4C0 | Description: Fuser unit related service call Fuser unit new/old detection fuse abnormality |
CB00 | Description: Finisher not connected |
C270 | Description: Scanning system related service call Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time. |
The most common error codes.
Error | |
---|---|
C260 | Description: Scanning system related service call Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON. |
CB50 | Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033] |
C4C0 | Description: Fuser unit related service call Fuser unit new/old detection fuse abnormality |
CB00 | Description: Finisher not connected |
C270 | Description: Scanning system related service call Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time. |
C260 | Description: Scanning system related service call Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON. |
CB50 | Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033] |
C4C0 | Description: Fuser unit related service call Fuser unit new/old detection fuse abnormality |
CB00 | Description: Finisher not connected |
C270 | Description: Scanning system related service call Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time. |