Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 4505AC Top Searches

These results are ranked by popularity.

Error
CB80Description: Finisher control PC board (FIN) backup RAM error. Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. MJ-1042
C4E0, C4E1Description: [C4E0] Fuser pressure roller release abnormality [C4E1] Fuser pressure roller contact/semi-contact abnormality. The releasing behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E0) The cont
E350Description: Paper transport jam in the PFP lower drawer (paper not reaching the 2nd drawer feed sensor)
CE00Description: Communication error between finisher and punch unit: Communication error between finisher controller PC board and punch controller PC board. MJ-1109/1110 (When MJ-6105 is installed)
ED14Description: [MJ-1109/1110] Rear alignment plate home position error

Toshiba e-Studio 4505AC Common Errors

The most common error codes.

Error
CB80Description: Finisher control PC board (FIN) backup RAM error. Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. MJ-1042
C4E0, C4E1Description: [C4E0] Fuser pressure roller release abnormality [C4E1] Fuser pressure roller contact/semi-contact abnormality. The releasing behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E0) The cont
E350Description: Paper transport jam in the PFP lower drawer (paper not reaching the 2nd drawer feed sensor)
CE00Description: Communication error between finisher and punch unit: Communication error between finisher controller PC board and punch controller PC board. MJ-1109/1110 (When MJ-6105 is installed)
ED14Description: [MJ-1109/1110] Rear alignment plate home position error
CB80Description: Finisher control PC board (FIN) backup RAM error. Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. MJ-1042
C4E0, C4E1Description: [C4E0] Fuser pressure roller release abnormality [C4E1] Fuser pressure roller contact/semi-contact abnormality. The releasing behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E0) The cont
E350Description: Paper transport jam in the PFP lower drawer (paper not reaching the 2nd drawer feed sensor)
CE00Description: Communication error between finisher and punch unit: Communication error between finisher controller PC board and punch controller PC board. MJ-1109/1110 (When MJ-6105 is installed)
ED14Description: [MJ-1109/1110] Rear alignment plate home position error