Toshiba e-Studio 356 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 356 Top Searches

These results are ranked by popularity.

Error
C1A0Description: LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally.
CB50Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033]
C440Description: Fuser unit related service call Fuser roller abnormality: The temperature of the fuser roller has exceeded the range of control or does not even reach the range.
CA10Description: Laser optical unit related service call Polygonal motor abnormality: The polygonal motor is not rotating normally.
C1B0Description: LCF transport motor abnormality: The LCF transport motor is not rotating normally.

Toshiba e-Studio 356 Common Errors

The most common error codes.

Error
C1A0Description: LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally.
CB50Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033]
C440Description: Fuser unit related service call Fuser roller abnormality: The temperature of the fuser roller has exceeded the range of control or does not even reach the range.
CA10Description: Laser optical unit related service call Polygonal motor abnormality: The polygonal motor is not rotating normally.
C1B0Description: LCF transport motor abnormality: The LCF transport motor is not rotating normally.
C1A0Description: LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally.
CB50Description: Stapler home position error: The stapler home position sensor does not work. [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally. [MJ-1032/MJ-1033]
C440Description: Fuser unit related service call Fuser roller abnormality: The temperature of the fuser roller has exceeded the range of control or does not even reach the range.
CA10Description: Laser optical unit related service call Polygonal motor abnormality: The polygonal motor is not rotating normally.
C1B0Description: LCF transport motor abnormality: The LCF transport motor is not rotating normally.