Toshiba e-Studio 352 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 352 Top Searches

These results are ranked by popularity.

Error
E120Description: Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor.
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing [MJ-1024].
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.
F090Description: SRAM abnormality on the SYS board

Toshiba e-Studio 352 Common Errors

The most common error codes.

Error
E120Description: Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor.
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing [MJ-1024].
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.
F090Description: SRAM abnormality on the SYS board
E120Description: Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor.
EA90Description: Door open jam: The delivery cover or the inlet cover has opened during printing [MJ-1024].
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.
F090Description: SRAM abnormality on the SYS board