Toshiba e-Studio 306SE Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 306SE Top Searches

These results are ranked by popularity.

Error
E280Description: ADU transport jam (paper not reaching the registration sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
EA40Description: Cover open error: The front cover or stationary tray cover is opened during paper transport. [MJ-1101/MJ-1106] Finisher cover open jam: (1) A paper jam occurs when any of the covers is opened during the transporting of paper in the Finisher
CC80Description: Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abno
EF10Description: Paper not supported for Saddle Stitch Finisher: Unsupported paper size, type and an excess number of pages for stapling are selected. [MJ- 1106]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.

Toshiba e-Studio 306SE Common Errors

The most common error codes.

Error
E280Description: ADU transport jam (paper not reaching the registration sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
EA40Description: Cover open error: The front cover or stationary tray cover is opened during paper transport. [MJ-1101/MJ-1106] Finisher cover open jam: (1) A paper jam occurs when any of the covers is opened during the transporting of paper in the Finisher
CC80Description: Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abno
EF10Description: Paper not supported for Saddle Stitch Finisher: Unsupported paper size, type and an excess number of pages for stapling are selected. [MJ- 1106]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.
E280Description: ADU transport jam (paper not reaching the registration sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
EA40Description: Cover open error: The front cover or stationary tray cover is opened during paper transport. [MJ-1101/MJ-1106] Finisher cover open jam: (1) A paper jam occurs when any of the covers is opened during the transporting of paper in the Finisher
CC80Description: Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abno
EF10Description: Paper not supported for Saddle Stitch Finisher: Unsupported paper size, type and an excess number of pages for stapling are selected. [MJ- 1106]
E712Description: Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor.