Toshiba e-Studio 306S Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 306S Top Searches

These results are ranked by popularity.

Error
EAE0Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
F901_1Description: Engine speed error: The speed information of the LGC board is damaged.
CB00Description: Finisher not connected
CC51Description: Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]

Toshiba e-Studio 306S Common Errors

The most common error codes.

Error
EAE0Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
F901_1Description: Engine speed error: The speed information of the LGC board is damaged.
CB00Description: Finisher not connected
CC51Description: Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]
EAE0Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
F901_1Description: Engine speed error: The speed information of the LGC board is damaged.
CB00Description: Finisher not connected
CC51Description: Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]