Toshiba e-Studio 283 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 283 Top Searches

These results are ranked by popularity.

Error
EAB0Description: Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor. [MJ-1025]
E330Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.
C280Description: Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time.
E711Description: Jam not reaching the original length sensor: The original fed from the original feeding tray does not reach the original length sensor.
CCA0Description: Lower stack tray lift motor abnormality: The lower stack tray lift motor is not rotating or the lower stack tray is not moving normally. [MJ-1022]

Toshiba e-Studio 283 Common Errors

The most common error codes.

Error
EAB0Description: Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor. [MJ-1025]
E330Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.
C280Description: Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time.
E711Description: Jam not reaching the original length sensor: The original fed from the original feeding tray does not reach the original length sensor.
CCA0Description: Lower stack tray lift motor abnormality: The lower stack tray lift motor is not rotating or the lower stack tray is not moving normally. [MJ-1022]
E330Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor.
E723Description: Jam not reaching the reverse sensor (during scanning): The original which passed the read sensor does not reach the reverse sensor when it is transported from the scanning section to reverse section.
C280Description: Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time.
EA60Description: Early arrival jam: The inlet sensor detects the paper earlier than a specified timing. [MJ-1022]
CCA0Description: Lower stack tray lift motor abnormality: The lower stack tray lift motor is not rotating or the lower stack tray is not moving normally. [MJ-1022]