Toshiba e-Studio 2555C Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2555C Top Searches

These results are ranked by popularity.

Error
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.

Toshiba e-Studio 2555C Common Errors

The most common error codes.

Error
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]
EF17Description: Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected. [MJ- 1108]
E130Description: 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor.