Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 255 Top Searches

These results are ranked by popularity.

Error
EA21Description: Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
CCE0Description: Paper trailing edge assist motor abnormality: Paper trailing edge assist motor is not rotating or paper trailing edge assist is not moving normally. [MJ-1024]
CB01Description: Finisher communication error

Toshiba e-Studio 255 Common Errors

The most common error codes.

Error
EA21Description: Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
CCE0Description: Paper trailing edge assist motor abnormality: Paper trailing edge assist motor is not rotating or paper trailing edge assist is not moving normally. [MJ-1024]
CB01Description: Finisher communication error
EA21Description: Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
F103Description: HDD transfer time-out: Reading/writing cannot be performed in the specified period of time.
CCE0Description: Paper trailing edge assist motor abnormality: Paper trailing edge assist motor is not rotating or paper trailing edge assist is not moving normally. [MJ-1024]
CB01Description: Finisher communication error