Toshiba e-Studio 242 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 242 Top Searches

These results are ranked by popularity.

Error
E03Description: Power-ON jam: The paper remaining the paper transport path when power turned ON.
E74Description: Stop jam the reverse sensor: The trailing edge the original does not pass the reversal sensor after its leading edge has reached this sensor. (RADF)
E33Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after has passed the PFP lower drawer feed sensor.
C01Description: Main motor abnormality: The main motor not rotating normally.
C45Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing.

Toshiba e-Studio 242 Common Errors

The most common error codes.

Error
E03Description: Power-ON jam: The paper remaining the paper transport path when power turned ON.
E74Description: Stop jam the reverse sensor: The trailing edge the original does not pass the reversal sensor after its leading edge has reached this sensor. (RADF)
E33Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after has passed the PFP lower drawer feed sensor.
C01Description: Main motor abnormality: The main motor not rotating normally.
C45Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing.
E03Description: Power-ON jam: The paper remaining the paper transport path when power turned ON.
E74Description: Stop jam the reverse sensor: The trailing edge the original does not pass the reversal sensor after its leading edge has reached this sensor. (RADF)
E33Description: PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after has passed the PFP lower drawer feed sensor.
C01Description: Main motor abnormality: The main motor not rotating normally.
C45Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing.