Toshiba e-Studio 2330c Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2330c Top Searches

These results are ranked by popularity.

Error
F100_2Description: HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged.
E120Description: Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor.
C452Description: Abnormal thermopile temperature difference (Heater lamp abnormality after abnormality judgment)
EA50Description: Stapling jam: Stapling is not performed properly. [MJ-1031/1101]
CCB0Description: Offset motor abnormality: The offset motor is not rotating normally.

Toshiba e-Studio 2330c Common Errors

The most common error codes.

Error
F100_2Description: HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged.
E120Description: Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor.
C452Description: Abnormal thermopile temperature difference (Heater lamp abnormality after abnormality judgment)
EA50Description: Stapling jam: Stapling is not performed properly. [MJ-1031/1101]
CCB0Description: Offset motor abnormality: The offset motor is not rotating normally.
F100_2Description: HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged.
E120Description: Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor.
C452Description: Abnormal thermopile temperature difference (Heater lamp abnormality after abnormality judgment)
EA50Description: Stapling jam: Stapling is not performed properly. [MJ-1031/1101]
CCB0Description: Offset motor abnormality: The offset motor is not rotating normally.