Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 233 Top Searches

These results are ranked by popularity.

Error
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
F091Description: NVRAM abnormality on the SYS board
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
CB60Description: Stapler unit shift motor abnormality: The stapler unit shift motor is not rotating normally or the Stapler Unit is not moving normally. [MJ-1025]

Toshiba e-Studio 233 Common Errors

The most common error codes.

Error
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
F091Description: NVRAM abnormality on the SYS board
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
CB60Description: Stapler unit shift motor abnormality: The stapler unit shift motor is not rotating normally or the Stapler Unit is not moving normally. [MJ-1025]
F091Description: NVRAM abnormality on the SYS board
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
CB60Description: Stapler unit shift motor abnormality: The stapler unit shift motor is not rotating normally or the Stapler Unit is not moving normally. [MJ-1025]