Error |
---|
These results are ranked by popularity.
Error | |
---|---|
CE00 | Description: Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board. |
F100_0 | Description: HDD format error: Operation of HDD key data fails. |
F130 | Description: Invaid MAC address |
E951 | Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor |
CBA0 | Description: Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106] |
The most common error codes.
Error | |
---|---|
CE00 | Description: Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board. |
F100_0 | Description: HDD format error: Operation of HDD key data fails. |
F130 | Description: Invaid MAC address |
E951 | Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor |
CBA0 | Description: Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106] |
C260 | Description: Scanning system related service call Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON. |
F100_0 | Description: HDD format error: Operation of HDD key data fails. |
F130 | Description: Invaid MAC address |
E951 | Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor |
CBA0 | Description: Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished. [MJ-1106] |