Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C43 | Description: Thermistor abnormality during warming or ready status after abnormality judgment |
C44 | Description: Heater abnormality after abnormality judgment: The temperature the fuser roller has exceeded the range control (in this case, the main switch turns OFF automatically) does not even reach the range. |
C01 | Description: Main motor abnormality: The main motor not rotating normally. |
C45 | Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing. |
C04 | Description: PFP motor abnormality: The PFP motor not rotating normally |
The most common error codes.
Error | |
---|---|
C43 | Description: Thermistor abnormality during warming or ready status after abnormality judgment |
C44 | Description: Heater abnormality after abnormality judgment: The temperature the fuser roller has exceeded the range control (in this case, the main switch turns OFF automatically) does not even reach the range. |
C01 | Description: Main motor abnormality: The main motor not rotating normally. |
C45 | Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing. |
C04 | Description: PFP motor abnormality: The PFP motor not rotating normally |
C43 | Description: Thermistor abnormality during warming or ready status after abnormality judgment |
C44 | Description: Heater abnormality after abnormality judgment: The temperature the fuser roller has exceeded the range control (in this case, the main switch turns OFF automatically) does not even reach the range. |
C01 | Description: Main motor abnormality: The main motor not rotating normally. |
C45 | Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing. |
C04 | Description: PFP motor abnormality: The PFP motor not rotating normally |