Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 202L Top Searches

These results are ranked by popularity.

Error
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
F091Description: NVRAM abnormality on the SYS board
E3D0Description: LCF transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor.

Toshiba e-Studio 202L Common Errors

The most common error codes.

Error
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
F091Description: NVRAM abnormality on the SYS board
E3D0Description: LCF transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor.
F091Description: NVRAM abnormality on the SYS board
E721Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
E140Description: Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor
C810Description: Fan motor abnormality: The fan motor is not rotating normally.
E951Description: Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor.