Toshiba e-Studio 2008A Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2008A Top Searches

These results are ranked by popularity.

Error
EA2Description: Paper transport jam in the Finisher (between the entrance path and sub-path sensor): The leading edge of the paper has passed the entrance sensor, but does not reach the sub-path sensor in the Finisher Unit transport path. [MJ-1042]
CC51Description: Punch unit sliding motor (M12) abnormality MJ-1042
E570Description: Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor.
CB30Description: Movable tray shift motor (M1) abnormality, Movable tray paper top detection error MJ-1042
ED15Description: Paddle home position error: The paddle is not at the home position. [MJ-1109/1110]

Toshiba e-Studio 2008A Common Errors

The most common error codes.

Error
EA2Description: Paper transport jam in the Finisher (between the entrance path and sub-path sensor): The leading edge of the paper has passed the entrance sensor, but does not reach the sub-path sensor in the Finisher Unit transport path. [MJ-1042]
CC51Description: Punch unit sliding motor (M12) abnormality MJ-1042
E570Description: Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor.
CB30Description: Movable tray shift motor (M1) abnormality, Movable tray paper top detection error MJ-1042
ED15Description: Paddle home position error: The paddle is not at the home position. [MJ-1109/1110]
EA2Description: Paper transport jam in the Finisher (between the entrance path and sub-path sensor): The leading edge of the paper has passed the entrance sensor, but does not reach the sub-path sensor in the Finisher Unit transport path. [MJ-1042]
CC51Description: Punch unit sliding motor (M12) abnormality MJ-1042
E570Description: Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor.
CB30Description: Movable tray shift motor (M1) abnormality, Movable tray paper top detection error MJ-1042
ED15Description: Paddle home position error: The paddle is not at the home position. [MJ-1109/1110]