Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C44 | Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range. |
E03 | Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON. |
E33 | Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor. |
E71 | Description: ADF jam. Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor. |
C45 | Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing. |
The most common error codes.
Error | |
---|---|
C44 | Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range. |
E03 | Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON. |
E33 | Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor. |
E71 | Description: ADF jam. Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor. |
C45 | Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing. |
C44 | Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range. |
E03 | Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON. |
E33 | Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor. |
E71 | Description: ADF jam. Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor. |
C45 | Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing. |