Toshiba e-Studio 195 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 195 Top Searches

These results are ranked by popularity.

Error
C44Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range.
E03Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
E86Description: ADF jam. ADF jam access cover open: The ADF jam access cover has opened during ADF operation.
E33Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor.
C45Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing.

Toshiba e-Studio 195 Common Errors

The most common error codes.

Error
C44Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range.
E03Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
E86Description: ADF jam. ADF jam access cover open: The ADF jam access cover has opened during ADF operation.
E33Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor.
C45Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing.
C44Description: Heater abnormality after abnormality judgment: Thetemperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range.
E03Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
E86Description: ADF jam. ADF jam access cover open: The ADF jam access cover has opened during ADF operation.
E33Description: Paper transport jam. PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper fed from the PFP lower drawer does not reach the registration sensor after it has passed the PFP lower drawer feed sensor.
C45Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing.